Datalogic VLASE IR 1109-1 42 Series, User Manual

Page: 10 / 136

INTRODUCTION
2
VLASE™ IR
MODEL DESCRIPTION
Vlase™ laser markers are described by their model number which indicates the charac-
teristics listed in the diagram below. Not all combinations are available. For a complete
list of combinations see the Models tab on the Product page of the website.
VLASE 1XX9-1X42
Nominal Power F-Theta scan lens
10 = 10W 3 = 160 S
20 = 20W 4 = 160L
6 = 254 S
7 = 254 L
9 = 100 L
A = 330 L
B = 420 L
CE COMPLIANCE
CE marking states the compliance of the product with essential requirements listed in
the applicable European directive. Since the directives and applicable standards are
subject to continuous updates, and since Datalogic promptly adopts these updates,
therefore the EU declaration of conformity is a living document. The EU declaration of
conformity is available for competent authorities and customers through Datalogic
commercial reference contacts. Since April 20th, 2016 the main European directives
applicable to Datalogic products require inclusion of an adequate analysis and assess-
ment of the risk(s). This evaluation was carried out in relation to the applicable points of
the standards listed in the Declaration of Conformity. Datalogic products are mainly
designed for integration purposes into more complex systems. For this reason it is under
the responsibility of the customer to do a new risk assessment regarding the final instal-
lation.
CAUTION
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.