CONNECTIONS
11
3
3.2 USB
CONNECTION
Viper™CE cradle can be connected to the host by means of a CAB-381 cable (see
par. 2.2.2 for details about the USB driver installation).
Then, it is necessary to insert the power supply plug into the jack on the cradle and
attach the power supply to a power outlet.
Once the host has been turned on, insert the Viper™CE terminal into the cradle.
Figure 9 - USB Connection
The following cable and power supply are listed with their order number:
A) Host
computer
B) 94A051550 CAB-381 USB Type A-B straight cable
C) Viper™CE
cradle
D) 94ACC4595 FPS18 power supply without cord
A
B
C
D
Summary of Contents for Viper CE Cradle
Page 1: ...Viper CE Cradle User s Manual ...
Page 2: ......
Page 3: ...Viper CE Cradle USER S MANUAL ...
Page 6: ...iv ...
