PEN READER CONFIGURATION
Read the RESTORE DEFAULT code, then read the PEN
interface selection code.
RESTORE DEFAULT
iPk
iPk
iPk
PEN
i$1#k
i$1#k
i$1#k
DEFAULT VALUES
USB DEFAULT SETTINGS
DATA FORMAT
: code identifier disabled, no field adjustment,
code length not transmitted, character replacement disabled.
USB KEYBOARD
: USA keyboard, inter-character and inter-
code delays disabled, control character emulation =
ctrl+shift+key;
USB COM
: no handshaking, delay disabled, rx timeout 5 sec.,
ack/nack disabled, FIFO enabled, serial trigger lock disabled;
Default Headers and Terminators for each USB mode:
-
USB-KBD: no header, terminator = ENTER
-
USB-KBD-ALT-MODE: no header, terminator = CR
-
USB-COM: no header, terminator = CR-LF
-
USB-IBM-TABLE TOP: not applicable
-
USB-IBM-HAND HELD: not applicable
RS232 Standard DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking,
delay disabled, rx timeout 5 sec., ack/nack disabled, FIFO
enabled, serial trigger lock disabled;
DATA FORMAT
: code identifier disabled, no field adjustment,
code length not transmitted,
no header
,
terminator = CR-LF
,
character replacement disabled
RS232 Nixdorf DEFAULT SETTINGS
9600 baud, parity odd, 8 data bits, 1 stop bit, handshaking
hardware (RTS/CTS), delay disabled, rx timeout 9.9 sec.,
ack/nack disabled, FIFO enabled, serial trigger lock disabled;
DATA FORMAT
: code identifier enabled, no field adjustment,
code length not transmitted,
no header
,
terminator = CR
,
character replacement disabled
WEDGE (continued)
IBM Terminals 31xx, 32xx, 34xx, 37xx:
To select the interface for these IBM Terminals, read the
correct KEY TRANSMISSION code. Select the
KEYBOARD TYPE if necessary (default = advanced
keyboard).
KEY TRANSMISSION MODE
make-only
keyboard
i$1Pk
i$1Pk
i$1Pk
make-break
keyboard
i$1Ik
i$1Ik
i$1Ik
KEYBOARD TYPE
advanced
keyboard
i',fk
i',fk
i',fk
typewriter
keyboard
i',ak
i',ak
i',ak
The following interface selection allows barcodes sent to
the PC to be interpreted correctly independently from the
Keyboard Nationality used.
You do not need to make a
Keyboard Nationality selection.
(default = Num Lock Unchanged)
Make sure the Num Lock key on your keyboard is ON.
IBM AT - ALT mode
i$1k
i$1k
i$1k
PC Notebook - ALT mode
i$1k
i$1k
i$1k
