manualshive.com logo in svg

Datalogic Star, User Manual, Page: 50 / 69

Share
Download
Datalogic Star User Manual Download Page 50

STAR Modem™ 

46 

 

 

2 

2.2.5 Frame 

Packing 

 
This parameter defines the format of the frame to be transmitted between 
STAR Modem™ and the Host. 
The frame received by STAR Modem™ may contain a maximum of 238 characters. 
All characters not included within this number will be transmitted from the Host in a 
new frame. 
 
Frame from Host to STAR Modem™ 
 

FRAME 

 
 
 

Address Address 

Delimiter 

MESSAGE 

 

 
The Address field has different meanings depending on if the FRAME is sent as a 2 
way answer to an RF device, or if it is a new message that the STAR Modem™ 
Client sends to a destination device. See par. 2.4.3 for details. 
 
Frame from STAR Modem™ to Host 
 

FRAME 

 
 
 

*Header Address Address 

Delimiter 

MESSAGE 

 
 
 

*Header  **Time-Stamp  **Time-Stamp-Del 

**Code Id  Code Len

DATA 

Terminator 

 

 
* 

There is only one header whose position can be defined through the related 
parameter (see par. 0). 

**  These are optional fields which can be configured depending on the type of RF 

device used. 

 
The Address field has different meanings depending on if the FRAME is a 2 way 
answer to a previous 2 way transaction initiated by a STAR Modem™ Client, or if it 
is a new message that an RF device sends to the STAR Modem™ Server. See par. 
2.4.3 for details. 
 

Summary of Contents for Star






































































Reviews:

No comments