manualshive.com logo in svg

Datalogic Skorpio, Information, Page: 4 / 4

Share
Download
Datalogic Skorpio Information Download Page 4

 

Skorpio Handheld Information 

3 

 

FOR AN UNRESPONSIVE  OR IMPROPERLY RESPON DING HANDHELD  

If the handheld does not respond properly, it may need a reboot. Perform a warm boot first and see if 
that fixes the problem. If it does not, then perform a cold boot.  

WARM BOOTING THE HANDHELD 

To perform a Warm Boot press the Yellow, Blue, and the ESC keys simultaneously. 

COLD BOOT THE HANDHELD 

WARNING: THIS WILL REQUIRE A REINSTALL AND RE-SETUP OF 

THE HANDHELD

  

1.

 

Turn off the Skorpio X3 by pressing the ON/OFF Power button.  

2.

 

Pull the battery latch down and remove the battery pack.  

3.

 

Simultaneously press the SCAN key and the Reset button in the battery compartment.  

4.

 

Insert the battery pack.  

5.

 

Turn on the Skorpio X3 by pressing the ON/OFF Power button.  

 

 

 

Summary of Contents for Skorpio

Page 1: ...if necessary and double tap the Date Time icon 4 Set the current date time and time zone 5 Tap the Apply button and close the screen SET TIME SEPARATOR 1 In Control Panel select Regional Settings 2 Tap the Customize button 3 Select the Time tab 4 Set the Time Style to h mm ss tt 5 If the Time Separator is not the colon character select the Time Separator box 6 Select the character from the drop do...

Page 2: ...you create a new profile Select Yes 8 Enter in security as needed 9 Once back on the Profile Tab tap the Commit button 10 Click the Main tab 11 Click on the Box next to Active profile and select the profile you just created 12 You can now switch to the Status tab IT will show a Device IP Address and a Signal Strength if you are properly connected to the Wi Fi 13 Select OK to save your new settings...

Page 3: ...o the installation instructions Connect the USB cable to your PC and the handheld or docking station if provided Windows will locate the hardware and complete the installation INSTALL GIGATRAK HANDHELD APPLICATION The handheld application can be found in the Handheld folder of your installation download 1 Connect the handheld docking station to your computer typically a USB connection and plug in ...

Page 4: ...HANDHELD To perform a Warm Boot press the Yellow Blue and the ESC keys simultaneously COLD BOOT THE HANDHELD WARNING THIS WILL REQUIRE A REINSTALL AND RE SETUP OF THE HANDHELD 1 Turn off the Skorpio X3 by pressing the ON OFF Power button 2 Pull the battery latch down and remove the battery pack 3 Simultaneously press the SCAN key and the Reset button in the battery compartment 4 Insert the battery...

Reviews:

No comments