Datalogic Skorpio X5 User Manual Download Page 40

Page: 40 / 124

GETTING STARTED

SKORPIO™ X5

Health Status
(displayed for 2
seconds)

Below 80% of cells state of health: right LED, blinking
blue.

Between 80% and 84% of cells state of health: right
LED, solid blue.

Between 85% and 89% of cells state of health: right and
center LEDs, solid blue.

Between 100% and 90% of cells state of health: right,
center and left LEDs, solid blue.

Failure Status
(displayed for 2
seconds in case
of error)

Temporary failure (battery FETs are opened but the nor-
mal operating can be restored by removing the fault
condition, eg. over/under-voltages, over-currents, over/
under-temperature): all LEDs blinking orange.

Permanent failure (battery FET are open and it is not
possible to recover the normal operating): all LEDs
blinking red.

Status

Description

Summary of Contents for Skorpio X5





























































































































Search results

Summary of Contents for Skorpio X5

Reviews:

Related manuals for Skorpio X5

Brands by name

Popular brands

Datalogic Skorpio X5, User Manual

Search results

Summary of Contents for Skorpio X5

Reviews:

Related manuals for Skorpio X5

Brands by name

Popular brands