Datalogic Skorpio X4, User Manual

Page: 172 / 258

Datalogic Applications
164 Skorpio™ X4
Autostart
The AutoStart program provides three functions:
• allows to create a list of applications (with optional command
line arguments) to run automatically before loading CAB files;
• automatically reinstalls specified CAB files when the Skorpio
X4 is cold booted;
• allows to create a list of applications (with optional command
line arguments) to run automatically after loading CAB files.
AutoStart launches each time the Skorpio X4 is rebooted executing
each line with the specified command line arguments. It will take into
account any AutoStart options at the beginning of the line.
Upon a Cold Boot, AutoStart installs all the CAB files located in the
\FlashDisk\CAB folder. If the CAB folder does not exist, no CAB files
will be installed.
AutoStart will then run the
Autostart.ini
from the \flashDisk
directory, executing each line with the specified command line
arguments. It will take into account any AutoStart options at the
beginning of the line.
Installing CAB Files
Copy any CAB files you want to install into the \FlashDisk\CAB
folder. These CAB files will then be automatically in-stalled in
alphabetical order the next time you start the device.