1
SKORPIO™ X3
32
4
4.3.1
Laser Data Capture
To scan barcodes, point the Skorpio X3 laser model onto the code from a distance
within the reading range while pressing the SCAN key or the pistol trigger.
The lighted band emitted by the laser must completely cross the barcode as shown in
the figure below.
If the scan has taken place correctly:
the Good Read LED glows green as long as the user holds the trigger;
the Good Read Beep
emits an acoustic signal;
the Green Spot
*
projects a green spot onto the bar code image.
It is enabled by default, but can be silenced
