DATALOGIC MEMOR™ SINGLE ETHERNET CRADLE
2.2 RS232
CONNECTION
The Datalogic Memor™ Single Ethernet Cradle can be connected to the host by
means of any standard null modem cable. The 9-pin female D-Sub connector
must be connected to the RS232 port of the cradle.
Once the host has been turned on, insert the Datalogic Memor™ mobile
computer into the cradle.
A
C
B
D*
Figure 5 - RS232 Connection
A) Host Computer
C) Datalogic Memor™ Single Ethernet
Cradle
B) Null Modem cable
D) Power
Supply
(only necessary for
battery charging)
NOTE
Be sure that the switch is in the “USB” position.
During the switch operation from USB position to Ethernet
position and vice versa the mobile computer must not be
inserted in the cradle.
∗
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC POWER SUPPLY
EU/USA PLUG.
5
