LED and Beeper Indications
Quick Reference Guide
37
a
Except when in sleep mode or when a Good Read LED Duration other than
00 is selected
Programming Mode
- The following indications ONLY occur when
the reader is in Programming Mode.
Reader
Disabled
The reader has been dis-
abled by the host.
The LED blinks continu-
ously
N/A
Green Spot
a
flashes momen-
tarily
Upon successful read of a
label, the software shall
turn the green spot on
for the time specified by
the configured value.
N/A
N/A
Indication
Description
LED
Beeper
Label Programming
Mode Entry
A valid programming
label has been scanned.
LED blinks con-
tinuously
Reader sounds four
low frequency beeps.
Label Programming
Mode Rejection of Label
A label has been rejected.
N/A
Reader sounds three
times at lowest fre-
quency and current
volume.
Label Programming
Mode Acceptance of Par-
tial Label
In cases where multiple
labels must be scanned to
program one feature, this
indication acknowledges
each portion as it is suc-
cessfully scanned.
N/A
Reader sounds one
short beep at highest
frequency and current
volume.
Label Programming
Mode Acceptance of Pro-
gramming
Configuration option(s)
have been successfully
programmed via labels
and the reader has exited
Programming Mode.
N/A
Reader sounds one
high frequency beep
and 4 low frequency
beeps followed by
reset beeps.
Label Programming
Mode Cancel Item Entry
Cancel label has been
scanned.
N/A
Reader sounds two
times at low fre-
quency and current
volume.
Indication
Description
LED
Beeper
