Datalogic QuickScan QD24 series, Product Reference Manual

Page: 124 / 314

Enter/Exit Programming Mode Code 39
114 QuickScan™ I QD24XX/QBT24XX/QM24XX
Code 39 Set Length 1
This feature specifies one of the bar code lengths for Code 39 Length Control on page 113 .
Length 1 is the minimum label length if in Variable Length on page 113 Mode, or the first fixed
length if in Fixed Length on page 113 Mode. Length includes the bar code’s data characters
only. The length can be set from 0 to 50 characters.
Table 3 provides examples for setting Length 1. See page 243 for detailed instructions on set-
ting this feature.
Table 3. Code 39 Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting 00 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC3L1
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
02 = Length 1 is 2 Characters