Linking the Reader
12
QuickScan™ QBT2400
Linking to a Bluetooth Adapter in HID mode
1.
Install any drivers provided with the Bluetooth
adapter.
2.
Scan the
Link to PC in HID
label below..
3.
Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4.
Use a text editor to see incoming data on the
port designated by the computer's Bluetooth
manager..
NOTE
The QBT2400 reader can be set up to require a
PIN code when connecting. If you want to set
up a PIN, or when adding new equipment to a
system that uses a custom security PIN, please
see the PRG for information.
Link to PC in HID
