Datalogic QuickScan Lite 21 Series, Product Reference Manual

Page: 18 / 324

Getting Started
8 QuickScan
TM
Lite QW2100
Hands Free Stand — continued
The holder cup can be positioned in any of the three angles shown in
Figure 4
. Grasp
the holder cup as indicated and rotate to the desired position.
Refer to
Scan Mode on page 30
for information about programming the reader for use
with the stand.
Figure 4. Adjusting the Stand
This accessory can also be used as a holder to mount the reader on a wall or other vertical
position as shown in
Figure 5
.
Figure 5. Using the Wall Holder
Programming
The reader is typically factory-configured with a set of default features standard to the
interface type you ordered. After scanning the interface bar code from the
Interfaces
sec-
tion, you can select other options and customize your reader through use of the instruc-
tions and programming bar codes available in the corresponding features section for your
interface and also the
Data Editing
and
Symbologies
chapters of this manual.