Datalogic QuickScan i QD2100, Reference Manual

Page: 113 / 388

Label ID
Product Reference Guide 103
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of
hex 0x01-0xFF), used to identify a bar code (symbology) type. It can be appended pre-
vious to or following the transmitted bar code data depending upon how this option is
enabled. This feature provides options for configuring custom Label IDs as a pre-loaded
set (see
Label ID: Pre-loaded Sets on page 103
) or individually per symbology (see
La-
bel ID: Set Individually Per Symbology on page 106
). If you wish to program the read-
er to always include an industry standard label identifier for ALL symbology types, see
the previous feature
Global AIM ID on page 100
.
Label ID: Pre-loaded Sets
The imager supports two pre-loaded sets of Label IDs.
Table 17
shows the USA set and
the EU set.
CAUTION
ENTER/EXIT PROGRAMMING MODE
DEFAULT
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
When changing from one Label ID set to another, all other imager con-
figuration settings, including the host interface type, will be erased
and set to the factory defaults. Any custom configuration or custom
defaults will be lost.