Datalogic PowerScan Series, Product Reference Manual

Page: 270 / 411

254
POWERSCAN™ PD/PM/PBT9600
Arrow Down String (4-key models only)
Associate a pre-defined string to the Arrow Down key
Legend for Arrow UP (4-key models only)
Set the string to be shown in display legend for arrow up Key
Set string for Arrow Down Key
$CDADS
To configure this feature, scan the ENTER/EXIT PRO -
GRAMMING MODE bar code above, then the bar code
at left. Define the label string by further scanning 32
digits from the Alphanumeric characters in
Appendix G, Keypad .
The digits must be the hexadecimal ASCII represen -
tation of the desired characters; if less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
End by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
Set legend for Arrow Up Key
$CPWSF
To configure this feature, scan the ENTER/EXIT PRO -
GRAMMING MODE bar code above, then the bar code
at left followed by 4 couples of digits from the Alpha -
numeric characters in Appendix G, Keypad . End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

3D00