Datalogic PowerScan PBT9500, Software Reference Manual

Page: 26 / 60

Enter/Exit Programming Mode DNS2 Address
22 BC9180™ Base Station/Charger
DNS2 Address
This is the address of the alternate or secondary DNS server for
BC9180™. This server is used if the DNS server specified as the preferred
DNS server (DNS1) is unreachable or cannot resolve DNS names to IP
addresses for DNS names queried by this computer
.
$ETD2
Set DNS2 address
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by 8
digits (in hex) from the Alphanumeric characters in
Appendix B, Keypad
representing your desired
character(s).
Exit programming mode by scanning the ENTER/
EXIT barcode again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
~
CANCEL
DEFAULT
Default DNS2 address = 00000000,
hexadecimal representation of 0.0.0.0