Datalogic PowerScan D8530, Reference Manual, Page: 35 / 160

CONFIGURATION USING CODE SYMBOLS
23
4.2 CHANGING DEFAULT SETTINGS
Once the reader is setup, you can change the default parameters to meet your
application needs. Refer to the preceding paragraphs for initial configuration in order
to set the default values and select the interface for your application.
In this manual, the configuration parameters are divided into logical groups making it
easy to find the desired function base on its reference group.
The
RS-232 , USB , WEDGE groups are for Standard Interface parameter
configuration.
The following parameter groups are common to all interface applications:
•
DATA FORMAT parameters regard the messages sent to the Host system.
•
CAMERA CONTROL parameters regard the control mode managing the
camera.
•
POWER SAVE parameters manage overall current consumption in the device.
•
CODE SELECTION parameters allow configuration of a personalized mix of
codes, code families and their options.
•
READING PARAMETERS control various operating modes and indicators
status functioning.
•
CAPTURE IMAGE parameters activate image capturing.
•
ADVANCED CAPTURE IMAGE parameters define options of the image to
capture.
•
ADVANCED DATA FORMAT parameters allow advanced formatting of
messages towards the Host.
Once the configuration is modified, it is possible to save it as a Custom Default
Configuration and to restore it at any time using a specific command.
SAVE CUSTOM DEFAULT RESTORE CUSTOM DEFAULT
AMHKGOBOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBDGIK
AKCBPJCJGIIJCMCFHOOBOFKHJK
AEFBJLBGMHPLMLBENPIJOBOEGK
AAPHBAJICAELBENPOIFJGNJBHK
AGKFBJKCGEBMMAEBJHEAKDILKK
DDDDLDLLLLDLLLLDLDLDDLDLLL
AMHKGOBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHBFIK
AKCBPJCJGIIJCMCFGPNNEKBJPK
AEFBJLBGMHPLMMGACKPFEHFFGK
AAPHBAJIDDAMENHAAFBFAFPDBK
AHKFBMLLKCCKGKAEDCDMCKPKIK
DDDDLDLLLLDLLLLDDDLDDLDLLL