Datalogic PowerScan D8300, Reference Manual

Page: 157 / 245

Enter Configuration Exit and Save Configuration
Ì$+;Î
16-KEY DK MODEL PARAMETERS
Ì$-?Î
148
DATA FORMAT
Keypad Specific Formatting
KEYBOARD DATA FORMAT ENABLE/DISABLE
This feature allows you to enable/disable specific formatting for data entered by keyboard and
barcode labels read by the scan engine.
Use this command only if you require differentiation in formatting between scanned barcodes
and data that is input from the keyboard. Refer to the standard Data Format section for other
formatting options.
NOTE : if you enable different formatting you must define the desired format, otherwise the
default data format will be used.
See par. 5.17.1 in the References section for a more detailed description of this feature.

Disabled
(Same as Code)
Enabled
(Different format allowed)
TIME STAMPING MODE
T ime Stamping Mode can be applied when entering data from either a barcode, from the
keyboard, or both.
NOTE : The standard Time Stamp enable/disable and setup are also applicable. Refer to the
“Time Stamping” command on page 80 for more information on this feature.

Data from both
barcode and keyboard
Data only from barcode
Data only from keyboard