background image

EULA

QUICK REFERENCE GUIDE   

V

of the Software  or such replacement, modified or upgraded version on  your acceptance of such

superseding Agreement. In addition, either party may terminate this Agreement at any time. Subject

to the foregoing, termination shall be effective upon notice to the other party. In the event that this

Agreement terminates for any reason, End User's license to use the Software will immediately ter

-

minate, and End User must immediately stop using the Software, destroy all copies of the Software

and all of its component parts, and, upon request, provide an affidavit certifying your compliance

with the foregoing. The provisions of Sub-sections 1.2, 1.3, 1.4, 1.5, 4, 5, 6, 8, and 12 shall survive

termination of this Agreement.

4. Limited Warranty

Datalogic warrants that, under normal use and operation, the Software will conform substantially to

the applicable Datalogic Product documentation for the period specified in the same, provided that

the Software is used with the Datalogic Product. Datalogic's entire liability and End User's sole and

exclusive remedy for any breach of the foregoing limited warranty will be, at Datalogic's option, the

provision of a downloadable patch or replacement software.

Datalogic does not warrant (i) that Software will meet End User's requirements; (ii) that Software

will be uninterrupted or defect error free; (iii) any non conformity derived from unauthorized use,

and/or improper installation or repair not in compliance with Datalogic Product documentation. End

User agrees that the existence of such non conformities or errors and Datalogic's inability to remedy

such errors shall not constitute a breach of this Agreement.

EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND

DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH

RESPECT TO THE DATALOGIC PRODUCT OR SOFTWARE, AND SPECIFICALLY DISCLAIMS THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

5. Limitation of Liability

EXCEPT AS PROVIDED IN THIS AGREEMENT, NEITHER DATALOGIC NOR ITS LICENSORS SHALL BE LIA

-

BLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S

LIABILITY  FOR  DAMAGES,  IF  ANY,  WHETHER  BASED  UPON  CONTRACT,  TORT  (INCLUDING  NEGLI

-

GENCE),  PRODUCT  LIABILITY,  STRICT  LIABILITY,  WARRANTY,  OR  ANY  OTHER  BASIS,  EXCEED  THE

PRICE  OR  FEE  PAID  BY  END  USER  FOR  THE  DATALOGIC  PRODUCT.  UNDER  NO  CIRCUMSTANCES

SHALL DATALOGIC OR ITS LICENSORS BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROF

-

ITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSE

-

QUENTIAL,  CONTINGENT,  INDIRECT,  INCIDENTAL,  PUNITIVE,  EXEMPLARY,  OR  OTHER  SIMILAR

DAMAGES,  EVEN  IF  DATALOGIC  OR  ITS  LICENSORS  HAVE  BEEN  ADVISED  OF  THE  POSSIBILITY  OF

SUCH  DAMAGES.  END  USER    MUST  BRING  ANY  ACTION  UNDER  THIS  AGREEMENT  WITHIN  12

(TWELVE) MONTHS AFTER THE CAUSE OF ACTION ARISES.

6. Indemnification

To the maximum extent permitted by law, End User agrees to defend, indemnify and hold harmless

Datalogic,  its  affiliates  and  their  respective  directors,  officers,  employees  and  agents  from  and

against any and all claims, actions, suits or proceedings, as well as any and all losses, liabilities, dam

-

ages, costs and expenses (including reasonable attorney's fees) arising out of or accruing from or

related to Licensee's failure to comply with the terms of this Agreement, including but not limited to

(1) non compliance with any applicable laws or regulations with Datalogic product documentation,

(2) unauthorized use or disclosure of Software, and (3) use of Software in combination with soft

-

ware, hardware, systems, or other items not provided by Datalogic.

7. Support

End User may request support for Software from Datalogic at Datalogic's standard support fees and

under  Datalogic's  standard  support  terms  and  conditions  in  effect  at  the  time  the  support  is

requested.

8. Government Restricted Rights; International Use

8.1 Use,  duplication,  or  disclosure  of  the  Software  by  the  U.S.  Government  is  subject  to  the

restrictions for computer software developed at private expense as set forth in the U.S. Fed

-

eral Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical

Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

8.2 If End User is using the Datalogic Product outside of the United States, End User must comply

with the applicable local laws of the country in which the Datalogic Product is used and with

U.S.  export  control  laws,.  Without  prejudice  of  the  foregoing,  the  End  User  agrees  to  not

export or re-export the Software, any part thereof, or any process or service that is the direct

product of the Software to any country, person or entity subject to U.S. export restrictions.

Summary of Contents for PowerScan BC9600 Series

































Reviews: