Datalogic PowerScan 9501-AR Series Product Reference Manual Download Page 77

Page: 77 / 362

Enter/Exit Programming Mode

Product Reference Guide

Advanced Formatting: User Label Edit

Advanced formatting is available to create user label edit scripts. See the

Datalogic Aladdin configuration application or contact Technical Support.

Case Conversion

This feature allows conversion of the case of all alphabetic characters to

upper or lower case.

DEFAULT

Case Conversion = Disable (no case conversion)

Case Conversion = Convert to upper case

Case Conversion = Convert to lower case

Case conversion affects ONLY scanned bar code data, and does not
affect Label ID, Prefix, Suffix, or other appended data.

Summary of Contents for PowerScan 9501-AR Series











































































































































































































































































































































































Search results

Summary of Contents for PowerScan 9501-AR Series

Reviews:

Related manuals for PowerScan 9501-AR Series

Brands by name

Popular brands

Datalogic PowerScan 9501-AR Series, Product Reference Manual

Search results

Summary of Contents for PowerScan 9501-AR Series

Reviews:

Related manuals for PowerScan 9501-AR Series

Brands by name

Popular brands