Datalogic PowerScan 7000, Quick Reference Manual

Page: 18 / 20

1-10 PowerScan
®
7000
• The scanner may not be programmed to output your bar code
data properly. For example, you scan “12345” and the host dis-
plays “A12345B.” Reprogram the scanner with the proper Data
Editing selections. Reference the PRG.
5. The scanner won’t read your bar code at all.
• Scan the part number bar code in the back of this manual or the
samples from the PRG. If the scanner reads sample bar codes,
check that your bar code is readable.
• Verify that your bar code symbology is enabled. See the PRG.
6. If you aren’t sure what programming options have been set in the
scanner, or if you want the factory default settings restored, go to
the
Resetting the Standard Product Defaults
section of this manual
and scan the standard factory default settings bar code.
Figure 4. Labeling and Nomenclature
Thi s illu s tration s how s label placement ONLY.
For actual re g ulatory, patent and other applicable
information, view the label s on the product int s elf,
or call your neare s t s ale s or s ervice office.
S can
Window
Tri gg er
Indicator
LED
s
S /N a nd L as er Sa fety L ab el
Sa fety/EMC M a rk s
S peaker
Port
Interface
(I/F) Cable