Datalogic Pegaso, Product Reference Manual

Page: 31 / 172

Network and Dialup
Product Reference Guide 2-17
Network and Dialup
To change the Network and Dialup connection settings, complete these steps:
1. Select
Start > Settings > Network and Dialup Connections
.
Figure 2-16. Changing the Network & Dialup Connection Settings.
2. Double-tap the connection to view or change the settings. The
SDCCF10G1
item
shown as an example can vary, depending on the radio installed and the number of
connections.
3. Complete the two tabs as shown in Figure 2-16 :
•
IP Address
: Select
DHCP
or set static IP settings.
•
Name Servers
: If using static IP, set
DNS
and
WINS
servers.