Datalogic MX-U100, Hardware Manual

Page: 13 / 64

MX-U Series Hardware Guide Front Panel Connections
1-7 Datalogic Automation, Inc..
Front Panel Connections
This illustration shows the connections on the Processor’s front panel.
Service Personnel Only - Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to battery maker’s instructions.
Symbol Function
A Status Lights (see “Status Lights” on page 1-9)
B Power Button: Press and release to turn on the
unit. If the unit is on, press and release to shut
down the OS and switch off the unit.
Press and hold to switch off without OS shut-
down. (Warning: Data could be lost.)
C Reset Button: Resets the processor which trig-
gers a hardware and PCI reset. The unit is
restarted. (Warning: Data could be lost.)
D USB 2.0 Port for USB Hardware key only. See
“USB Hardware Key” on page 2-7.
E CFast Slot. A CFast card can be used for
extended storage.
Note : Do NOT insert or
remove the card while the unit is powered on.
(See “CFast Card” on page 2-8)
F Battery Compartment (See “Battery” on page 2-
9)
C
B
A
D
F
E