Datalogic MX-U100, Hardware Manual

Page: 15 / 64

MX-U Series Hardware Guide Status Lights
1-9 Datalogic Automation, Inc..
Status Lights
This illustration shows the status lights on the front of the Processor.
This illustration shows the status lights for the two Ethernet connections on the top of the Processor.
Symbol Name When lit indicates:
1 Power Power is On
2 HDD Solid-state hard drive or Cfast access is active
3 Link On: An active Smart Display Link connection is estab-
lished
Blinking: Connection is interrupted due to power loss
to display unit
4 Run An application is running
Symbol Name When lit indicates:
1 ETH1 and ETH2
Speed Off: 10 Mbps
Green: 100 Mbps
Orange: 1000 Mbps (Gigabit)
2 ETH1 and ETH2
Activity/Link
On: Link is established
Blinking: Data is being transferred
1 2