Datalogic MINEC 4x, User Manual

Page: 46 / 59

Minec 4x
28
3
8. Click on the “Finish” button to complete the procedure:
NOTE
Only one infrared device at a time must be active. To disable other
infrared devices, use the Device Manager available in the Control
Panel\System\Hardware folder.
3.8.3 RF Remote Connection
For RF models, it is possible to make a remote connection as follows:
1.
A partnership must be established between the terminal and the PC using one
of the methods previously described (PC IrDA to Terminal IrDA Connection or
Cradle Connection).
2. Disconnect the ActiveSync connection.
3. Perform the Save Registry procedure as described in par. 3.7.1.
4. Launch the "repllog /remote" command from the Run Menu (available from the
Start Button).
5. In the dialog box that will appear, it will be possible to choose a method to
connect to the PC. Choose Network Connection and press the Connect button.