USE AND FUNCTIONING
41
4
Cold Boot
A cold boot is a complete reset of the Memor X3 in which all applications are forcibly
closed and RAM is completely cleared. Registry is restored from persistent memory if
a saved copy is available (see 4.5.7) and RAM file system completely erased. You
will lose any applications and data (registry too) which are not stored in persistent
flash memory.
A cold boot is necessary when the Windows CE operating system locks up and the
warm boot command does not work.
To perform a cold boot, press these keys simultaneously:
+
+
Clean Boot
A clean boot is a cold boot that causes the device to be restored to factory
configuration. The Memor X3 will reset to its factory configuration, clear the working
RAM and initialize the file system. You will lose any applications and data stored in
persistent flash memory. At the next startup the system will ask to recalibrate the
touch screen.
To perform a clean boot, follow these steps:
1. Perform a Cold Boot (see Cold Boot).
2. Quickly release all the keys when the screen goes black.
3. Within 1 second press and hold down the Esc and 0 keys until the Clean boot
confirmation shows up.
4. Release the Esc and 0 keys.
5. Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the Clean
Boot and proceed with a Cold Boot.
