82
MEMOR™ 11
DATA CAPTURE
The Memor 11 has an integrated imager that collects data by scanning bar codes.
The imager uses digital camera technology to take a digital picture of a bar code, the
image is stored in memory and software decoding algorithms are executed to extract
the data from the image.
See "
for instructions on configuring the scanner settings.
To scan a bar code symbol:
1. Point the scan window at the barcode from a distance within the reading range.
2. Press one of the scan triggers. The imager projects a laser aiming pattern similar to
those used on cameras. The aiming pattern is used to position the barcode or
object within the field of view.
3. Center the symbol in any orientation within the aiming pattern. Ensure the entire
symbol is within the rectangular area formed by the brackets in the aiming pat
-
tern, then either wait for the timeout or release the scan trigger to capture the
image. A red beam illuminates the symbol, which is captured and decoded.
If the scan has been successful:
• If enabled, the good read beep plays.
• If enabled, the GreenSpot projects a green spot onto the bar code image.
If enabled, the good read indicator positioned at the top left side of the display glows
solid green.
Linear Bar Code
2D Matrix Symbol
