Datalogic Memor 1, User Manual

Page: 49 / 204

Getting Started
User’s Manual 43
Hard Reset
Restarts the device resetting all the hardware components. This
procedure guarantees the safe reboot of the device in any condition,
without causing damage to the device and without data loss. It is
generally used when the device stops responding or after a critical
failure that compromises its usability.
To perform a hard reset, do the following steps:
1. Perform a full shutdown by pressing and holding the power key
with a metallic clip for about 15 seconds. After clip release, the
left and right LEDs will blink once simultaneously to confirm the
correct shutdown (see
LED Indicators on page 46 ).
2. Press the Scan Key or the Scan Trigger to restart the device.
NOTE
After a hard reset, the date and time settings will be lost.