Datalogic Magellan 9300i, Product Reference Manual

Page: 13 / 520

Product Reference Guide 1
Chapter 1
Introduction
This manual provides details for installation, configuration, calibration and
operation of the scanner or scanning-scale.
Manual Overview
Chapter 1, Introduction , presents the manual’s contents, describes features
and specifications, provides regulatory and safety information, and lists the bar
code symbologies the scanner will read.
Chapter 2, Site Preparation and Installation , supplies physical dimensions for
the scanner or scanning-scale and its most common accessories, and details
counter preparation and installation. Cable routing, connection and testing are
also explained in this section.
Chapter 3, Operation and Maintenance , describes use and maintenance; pro-
viding details about operator controls, programming and diagnostic modes,
scale “zeroing” and calibration. Scanner and scale routine maintenance are out-
lined in this section as well.
Chapter 4, Image Capture and Customer Service Scanner , defines the functions
of the optional Customer Service Scanner (CSS) and Image Capture features.
Chapter 5, Problem Isolation , provides an outline of three scanning-scale test
modes: Selftest, Operational Tests and Diagnostic Tests. Descriptions of the
error indications if the scanner detects a system problem and troubleshooting
flowcharts to aid in problem resolution are also presented.
Chapter 6, Calibration Procedures , explains scale calibration and verification
procedures, including procedures for calibrating the scale in pounds as well as
kilograms.
Chapter 7, Programming , details procedures and contains different sections
provides custom bar codes for setting programmable scanner and scanning-
scale features.
Appendix A, LED/Audio Indications & Controls , lists the various functions and
indications of the scanner’s control panel features.
Appendix B, Cable Information , outlines wire requirements, connector specifi-
cations and pinout details for associated product cabling.
NOTE
For the purposes of this manual, any Magellan 9300i / 9400i
model may be termed as simply “scanner” (including scanning-
scale models).
Because of differences due to multiple model types and options,
the illustrations shown in this manual may vary from the model(s)
in use at your location.