background image

RSS Expanded

Product Reference Guide

                           5-21

RSS Expanded — continued

Length Control

Fixed Length Decoding— 

When fixed length decoding is enabled, the scanner will decode a 

bar code if the label length matches one of the configurable fixed lengths.

Variable Length Decoding— 

When variable length decoding is enabled, the scanner will 

decode a bar code if the label length falls in the range of the configurable minimum and maxi-
mum length.

Configuring Fixed Length Decoding:

1. Scan the START/END bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the START/END bar code.

4. Set Length 1 to the first fixed length by following the 

RSS Expanded Length 1, Length 2 

Programming Instructions

 below.

5. Set Length 2 to the second fixed length (or to ‘000’ if there is only one fixed length) by 

following the 

RSS Expanded Length 1, Length 2 Programming Instructions

 below.

Configuring Variable Length Decoding:

1. Scan the START/END bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the START/END bar code.

4. Set Length 1 to the first variable length by following the 

RSS Expanded Length 1, Length 2 

Programming Instructions

 below.

5. Set Length 2 to the second variable length by following the 

RSS Expanded Length 1, 

Length 2 Programming Instructions

 below.

START / END

PROGRAMMING BAR CODES

Variable Length Decoding

DEFAULT

Fixed Length Decoding

Summary of Contents for MAGELLAN 1400I





















































































































































































Reviews: