6
Magellan
TM
1400i
Using the Stand
The latch on the back of the stand is used for
locking and unlocking the stand to the scanner.
(Before placing the scanner in the stand, make
sure the latch is pulled all the way outward.)
With the latch in its outward position, the stand
will function as a dock for the scanner that will
remain on the counter when the scanner is
picked up for handheld scanning. To lock the
stand to the scanner, place the scanner into the
stand and push the latch in toward the scanner
until it clicks.
The stand can also be permanently attached to a wall or countertop using
screws through the mounting holes provided on the base of the stand.
How to Scan
Three scanning modes are provided:
1.
On Counter Omni-Directional Scanning
Present or “sweep” items in front of the
scanning window as shown. The “sweet
spot” of the scanning zone is between 1”
(3cm) to 6” (13cm) directly in front of
the scan window.
2.
Handheld Omni-Directional Scanning
Best used for scanning items that are too
large or awkward to present to the scan-
ner when it is on the counter. Pick up the
scanner and present it to the bar code on
the item to scan until a good read occurs.
1
6"
(13cm)
1"
(3cm)
"Sweet Spot"
2
4
5
387
5 5593
0
0
50 lbs.
