Datalogic Lynx D, Reference Manual

Page: 22 / 169

LYNX™ D
2
The field of view indicated by the aiming system will be smaller when the Lynx™ D is
closer to the code and larger when it is farther from the code. Symbologies with
smaller bars or elements (mil size) should be read closer to the unit. Symbologies
with larger bars or elements (mil size) should be read farther from the unit. (See
chapter 8 for further details).
2.2 NORMAL OPERATION
Lynx™ D normally functions by capturing and decoding codes.
Point the reader at the target and pull the trigger partially to enable the aiming
system. Then, pull it completely to capture and decode the image. The reader will
repeatedly flash until the symbol is decoded or timeout is reached. In between the
flashes of the reader, the aiming system keeps on showing the field of view on the
target (see Figure 2
).
As you are reading code symbols, adjust the distance at which you are holding the
reader.
NOTE
The Lynx™ D hand-held reader aiming system is designed for
general reading and decoding of 1D and 2D symbols. Some var
i ation
in reading distance will occur due to narrow bar width and other
factors.
NOTE
e barcode and/or set the
Camera Control parameters (see page 50).
If reading codes positioned on reflective surfaces, it may be
necessary to tilt the reader with respect to th
.3 IMAGE CAPTURING 2
Lynx™ D can als
nd other items.
o function as a camera by capturing images of labels, signatures,
t read another Capture Image Code of the same
r a different Preset Configuration.
a
In order to capture an image, the user should read a Capture Image code (see
page 72), then point at the image subject and pull the trigger. This way, the image
will be captured and sent to the host PC. Lynx™ D then returns to normal operation.
To capture another image you mus
o
4