KYMAN™
3
3.8.6 Stylus
Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select one
item with the stylus, another item is erroneously selected).
To recalibrate the touch screen on Windows CE, complete the following steps:
1. Select
Start > Settings > Control Panel > Stylus
to open the
Stylus
Properties
dialog as shown in Figure 1.
2. Adjust
Double-Tap
sensitivity if needed or desired.
3. Select
the
Calibration
tab to open the
Calibration
application.
Figure 1
4. Tap
Recalibrate
to open the
Calibration
screen shown in Figure 2.
5. Carefully press and briefly hold stylus on the center of the target. Repeat as the
target moves around the screen. Press the
<ESC>
key to cancel the stylus
calibration.
6. Press
the
<ENTER>
key or tap the screen to accept the new calibration settings.
Press the
<ESC>
key to keep the old settings.
7. New calibration settings are persistently saved in registry.
56
Summary of Contents for Kyman\
Page 18: ...xviii...
Page 56: ...KYMAN 3 Windows CE Taskbar Windows Mobile Taskbars 38...
