Datalogic Joya Touch 22 User Manual Download Page 16

Page: 16 / 116

CHARGING INSTRUCTIONS

JOYA™ TOUCH 22

Single Slot Dock Locking LED Indicators

LED

Status

Power On (Green LED)

Solid green for 3 seconds Dock bootstrap: cradle application started.

Short blink every few

seconds

Dock standby (if the standby LED is enabled): the dock is

powered and ready, no device inserted. You can enable/dis

able the standby LED feature from DL Cradle Manager.

Off

Dock standby (if the standby LED is disabled): the dock is

powered and ready, no device inserted. You can enable/dis

able the standby LED feature from DL Cradle Manager.

Battery Charger LED (Bicolor Green/Red LED)

Off

Device not charging or not inserted (see above).

Solid red

Device is charging.

Solid green

Device charging completed.

Maintenance LED (Red LED)

Blink red, 1 quick pulse

Cradle not calibrated. Solution: perform an "auto calibration"

from DL Cradle Manager. Ensure that levers are free to move.

Blink red, 2 quick pulses

Lever wrong position. It is open but it should be closed or

vice versa. Solution: restore the lever position (e.g.remove

the mechanical key from the slot).

Blink red, 3 quick pulses

FOD (Foreign Object Detection). It’s a WLC error related to

metallic parts between transmitter and receiver coils. The

power transfer is suspended. Solution: remove the device

from the cradle, then remove the metallic part causing the

problem.

Blink red, 4 quick pulses

EOC (end of charge) timeout error. The WLC EOC signal has

been kept enabled by the terminal for too much time. Typi

cally, it is caused by a bug in the terminal firmware. The

power transfer is disabled.

Blink red, 5 quick pulses

WLC generic error. The WLC system seems unstable and

unable to setup a stable power transfer within a reasonable

time. The power transfer is suspended. Solution: try to

extract the device from the cradle and to re-insert it again.

Blink red, 6 quick pulses

Device charging error.

Solid red

Firmware upgrade.

Summary of Contents for Joya Touch 22





















































































































Search results

Summary of Contents for Joya Touch 22

Reviews:

Related manuals for Joya Touch 22

Brands by name

Popular brands

Datalogic Joya Touch 22, User Manual

Search results

Summary of Contents for Joya Touch 22

Reviews:

Related manuals for Joya Touch 22

Brands by name

Popular brands