Teach-in Parameters
Index
(dec)
Parameter
Object Name
Lenght
Subindex
(offset)
Value/Range
Description
Data Type Access* Remark
0x003A (58)
TI Select
1 octet
0x00 = SSC1 (default, C/Q pin and DO
pin)
Selection for Teach-in channel (volatile)
UIntegerT
R/W
C/Q and DO outputs are antivalent.
Teach SSC1 equals to teach SSC2
0x003B (59)
TI Result
1 octet
1(0)
2(4)
3(5)
Teach-in State
Flag SP1 TP1
Flag SP2 TP1
See IO-Link Smart Sensor Profile
UIntegerT4
BooleanT
BooleanT
RO
0x003C (60)
SSC1 Param
2 octets
2 octets
1(16)
2(0)
0-4095
Not used
Normalized distance (
M03
) / Switching threshold (
W03
) /
Trimmer value (sensitivity adjustment) (
Trimmer models
)
UIntegerT
R/W
Saved in non-volatile memory
0x003D (61)
SSC1 Config
1 octet
1 octet
1(24)
2(16)
0x00: High Active (default
C01
)
0x01: Low Active (default
B01, T01
)
0x01: Single Point (default)
C/Q pin configuration
UIntegerT
UIntegerT
R/W
Saved in non-volatile memory
2 octets
3(0)
Not used (
M03
)
0 ..10 Hysteresis (
W03
)
0 - 1 Hysteresis (
Trimmer models
)
UIntegerT
0x003E (62)
SSC2 Param
2 octets
2 octets
1(16)
2(0)
0-4095
Non used
Normalized distance
UIntegerT
R/W
Saved in non-volatile memory
0x003F (63)
SSC2 Config
1 octet
1 octet
1(24)
2(16)
0x00: High Active (default
B01, T01
)
0x01: Low Active (default
C01
)
0x01: Single Point (default)
DO pin configuration
UIntegerT
UIntegerT
R/W
Saved in non-volatile memory
2 octets
3(0)
Not used (
M03
)
0 ..10 Hysteresis (
W03
)
0 - 1 Hysteresis (
Trimmer models
)
UIntegerT
0x0066 (102)
Adjustment mode 1 octet
0x00 = manual (default)
0x01 = IO-Link
Status of trimmer regulation (manual/IO-Link) (
B01, C01, T01
)
BooleanT
R/W
Device Specific Parameters
Index
(dec)
Parameter
Object Name
Lenght
Subindex
(offset)
Value/Range
Description
Data Type
Access* Remark
0x0048 (72)
Delay Settings
1 octet
1(32)
0 = no delay (default)
0x2 = Delay ON
0x3 = One Shot
0x4 = Delay OFF
Select Delay mode (ON / OFF/ ONE SHOT)
UIntegerT
R/W
Saved in non-volatile memory
4 octets
2(0)
0...(2^32)-1
Delay value =
Delay [ms] *1000 / 141 (
M03
)
Delay [ms] *1000 / 45 (
W03
)
Delay [ms] *1000 / 157 (
T01/C01/B01 LED emission
)
Delay [ms] *1000 / 67 (
C01 Laser
)
Delay [ms] *1000 / 70 (
B01 Laser
)
UIntegerT
R/W
0x00B4 (180)
Output type
1 octet
1 octet
1(8)
2(0)
0x01 = PNP (default)
0x03 = Push Pull
(1)
0x01 = PNP (default)
0x02 = NPN
0x03 = Push Pull
Output type of C/Q pin when in SIO mode
Output type of DO pin
UIntegerT
UIntegerT
R/W
R/W
Saved in non-volatile memory
(1)
The No Output configured in Push Pull mode with an NPN load does not reactivate after a short circuit condition. Remove the short circuit condition and cycle power to the sensor.
*RO = read only, WO = write only, R/W = read/write
