INSERTION INTO STAND
UK
Pair the reader to the stand paying attention to
insert the handle into the stand clip (see figure
above). Correct insertion will be signaled by a
beep; the reader will then be ready to read
barcodes.
I
Posizionare la pistola nello stand assicurandosi
che il manico sia inserito nel fermo dello stand
stesso (vedi figura sopra). Un beep sonoro
segnalerà il corretto inserimento ed il lettore sarà
pronto per leggere i codici a barre.
F
Placer le pistolet dans le support en faisant
attention d’introduire la poignée dans le crochet du
support (voir figure ci-dessus). Un beep sonore
indiquera un positionnement correct. Le pistolet
est ainsi prêt à lire les codes.
D
Positionieren Sie die Pistole im Halter und stecken
Sie den Griff in die Öffnung des Halters (siehe Bild
oben). Das korrekte Positionieren wird durch einen
Piepton angezeigt. Dann ist die Pistole bereit
Codes zu lesen.
E
Poner el lector en su soporte insertando la
empuñadura en el clip del soporte (ver figura
arriba). El soporte emitirá un pitido al insertar el
lector de forma correcta. El lector estará entonces
listo para leer códigos de barras.
READING DIAGRAM
0
5
10
15
20
25
30
35
-15
-10
-5
0
5
10
15
D110 - Reading Zones (10° skew angle)
(cm)
CODE 39
0.13 mm
(5 mils)
EAN13 M=1
0.33 mm
(13 mils)
CODE 39
0.50 mm
(20 mils)
0.13 mm
(5 mils)
FCC COMPLIANCE
This device complies with PART 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
