Statement of Agency Compliance
48
Gryphon™ I GBT4400
FCC RF Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements,
for mobile configurations, a separation distance of at least 20
cm must be maintained between the antenna of this device
and all persons.
This device must not be co-located or operating in conjunc-
tion with any other antenna or transmitter.
Canadian Notice
This equipment does not exceed the Class B limits for radio
noise emissions as described in the Radio Interference Regula-
tions of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radioelec-
triques depassant les limites applicables aux appareils nume-
riques de la classe B prescrites dans le Reglement sur le
brouillage radioelectrique edicte par le ministere des Commu-
nications du Canada.
Power Supply
This device is intended to be connected to a UL Listed/CSA
Certified computer which supplies power directly to the read-
er or else be supplied by UL Listed/CSA Certified Power Unit
marked “Class 2” or LPS power source rated 5-14V minimum
900mA, which supplies power directly to the Base/Charger via
the power connector of the Base itself.
CAUTION
Exposure to Radio-Frequency Radiation
CAUTION
Do not attempt to open or otherwise service any compo-
nents in the optics cavity. Opening or servicing any part of
the optics cavity by unauthorized personnel may violate
laser safety regulations.
