Mounting the Scanner
Integration Guide
13
Table 3. J3 Connector Pin Assignment
The Good Read Beep is a 2750Hz signal burst for 100ms provided by an
on board Open Collector transistor drive circuit. Below is a simple exam-
ple of an external audio implementation. See
on page 18 for additional information about Good Read Beep output.
Figure 8. Beeper Connection Scheme
Scanner Ventilation
When mounting the scanner inside an enclosure, it is important to have
proper ventilation to ensure that the scanner temperature does not ex-
ceed the maximum range as listed in
page 18. The reliability of the scanner may be compromised if the tem-
perature range is not maintained.
Pin Pin
Functionality
1
Good Read Beep Signal (open collector, active low)
2
Common (gnd)
Summary of Contents for Gryphon GFE4400
