![background image](http://html1.mh-extra.com/html/datalogic/gryphon-gd4100/gryphon-gd4100_user-manual_3678985006.webp)
Sheet # 694u – Bar code (option)
Version 1.04a
User guide
ATEQ 6th series
Page 6/10
"
RESET EOC
" parameter.
Adjusted on "
No
" the device will save in
memory the readed bar code for all the
following programs, until a new bar code will
be readed.
Adjusted on "
Yes
" it will must flash a new bar
code before each start cycle.
In the "
KEYBOARD SUFFIX
" parameter
check or enter the suffix value
= 13
.
This suffix will be applied at the end of the bar
code reader frame to notify to the device that
the frame is ended.
13 = CR
in decimal (Carriage Return)