manualshive.com logo in svg

Datalogic Gryphon GBT4200, Product Reference Manual, Page: 86 / 304

Share
Download
Datalogic Gryphon GBT4200 Product Reference Manual Download Page 86

ENTER/EXIT PROGRAMMING MODE

KEYBOARD INTERFACE

72

   GRYPHON™ I GD/GBT/GM4200

Keyboard Numeric Keypad

This feature specifies if numeric characters will be sent using the standard keys or the 
numeric keypad.

Keyboard Send Control Characters

This feature is used by the Keyboard Wedge and USB Keyboard interfaces. It 
specifies how the scanner transmits ASCII control characters to the host. Refer-
ence 

Appendix E

 Scancode Tables for more information about control characters.

Options are as follows:

Send Ctrl+Key : 

ASCII characters from 00H to 0x1FH inclusive are transmitted in

 

the format Ctrl+Key. Special keys are available in the range from 81H to A1.

Send Ctrl+Shift+Key : 

The behavior is the same as above, but control keys are

 

sent in the format Ctrl+Shift+Keys.

Send Special Function Key : 

Send characters between 00H and 1FH according to

 

the special function key mapping table (see "

Interface Type PC AT PS/2 Alt Mode or 

USB-Keyboard Alt Mode" on page 280

). This is used to send keys that are not in the

 

normal ASCII set. A unique set is provided for each available scancode set.

Keyboard Numeric Keypad = Standard Keys

$CKBKP00

$CKBKP01

Keyboard Numeric Keypad = Numeric Keypad

Keyboard Send Control Characters = Send Ctrl+Key

$CKBSC00

$CKBSC01

Keyboard Send Control Characters = Send Ctrl+Shift+Key

Keyboard Send Control Characters = Send Special Function Key

$CKBSC02

Summary of Contents for Gryphon GBT4200

















































































































































































































































































































Reviews:

No comments