Datalogic Gryphon D412Plus, Product Reference Manual, Page: 55 / 160

Product Reference Guide 53
\
Enter Reader Configuration Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
DATA FORMAT
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
S
YMBOLOGY
C
HARACTER
S
UBSTITUTION
C
HARACTER
S
UBSTITUTION
S
YMBOLOGY
C
HARACTER
D
ELETION
Symbology Character Substitution
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAGGIK
AKCBPJCJGIIJCMCFGLKMBHMJPK
AEFBJLBGMHPKMKHEEDGFDMGHGK
AAPHBAJJDCFDBILOKBFBDLPDDK
AHKFAINIMEHCEPHBKFHEKPGIIK
DLLLLDLDDLDLLLLDLDDDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Read the corresponding character as Hex
value from the Hex/Numeric table which
identifies the character to be substituted.
Valid value is in the range 00-7F.
3. Read the corresponding character as Hex
value from the Hex/Numeric table which
identifies the new substituting character.
Valid value is in the range 00-7F.
4. Read the following code to enable the con-
figuration you have set.
Character Substitution
AOCPBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGGIK
AKCBPJCJGIIJCMCEHIOKMIBLLK
AEFBJLBGMHPKMIEMGJJLHHPFGK
AAPHBAJJCCBDNBLDEGHOFPEFFK
AGKFAIPCKMMKCNMCABKAGKBKIK
DDLLLDLDLDDLLLLDDDLDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. 0 = disabled

1 = enabled
Symbology Character Deletion
AOCLFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBCHIK
AKCBPJCJGIIJCMCEGNKPOMNLPK
AEFBJLBGMHPLNNHGKPAHOOKHGK
AAPHBAJJDCBHOFBHELNHMNODHK
AFKFAOPKHIGEGLDIJLMCIHMKIK
DLLLLDLDDLLLLLLDLDDDDLDLDL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Read the corresponding character as Hex value
from the Hex/Numeric table which identifies
the character to be deleted.

Valid value is in the range 00-7F.
3. Read the code to enable the configuration you
have set.