Datalogic Gryphon BT4102, Product Reference Manual

Page: 220 / 354

ENTER/EXIT PROGRAMMING MODE
218 Gryphon™ I GD4132/GM4102/GBT4102
Code 11 Set Length 2
This feature specifies one of the barcode lengths for Code 11 Length Control .
Length 2 is the maximum label length if in Variable Length Mode, or the second
fixed length if in Fixed Length Mode. Length includes the barcode’s check and
data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 19 provides examples for setting Length 2. See page 295 for detailed
instructions on setting this feature.
Table 19. Code 11 Length 2 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (pad with
leading zeroes)
00 (Ignore This
Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘0’ and ‘F’ ‘3’ AND 2’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters