Datalogic Falcon 4410, Product Reference Manual, Page: 43 / 240

Network and Dialup
Product Reference Guide 2-27
Network and Dialup
To change the Network and Dialup connection settings, complete these
steps:
1. Select
Start > Settings > Network and Dialup Connections
.
Figure 2-18. Changing Network & Dialup Settings.
2. Double-tap the connection to view or change the settings. The
SDCCF10G1
item shown in the example above can vary, depending
on the radio installed and the number of connections.
3. Complete the two tabs as shown in
Figure 2-18
:
•
IP Address
: Select
DHCP
or set static IP settings.
•
Name Servers
: If using static IP, set
DNS
and
WINS
servers.