Datalogic DSM0400, Product Reference Manual

Page: 153 / 252

Enter/Exit Programming Mode
Product Reference Guide 145
GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the barcode lengths for GS1 DataBar™ Expanded.
Length 1 is the minimum label length if in Variable Length on page 93 Mode, or
the first fixed length if in Fixed Length on page 93 Mode. Length includes the bar-
code’s data characters only. The length can be set from 1 to 74 characters. For
more detailed programming instructions see, "Set Length" on Chapter 4, Refer-
ences .
Table 17 provides some examples for setting Length 1.
Table 17. GS1 DataBar™ Expanded Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Character 07 Characters 52 Characters 74 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
4
Scan Two Characters From
Appendix C
‘0’ and ‘1’ ‘0’ and ‘7’ ‘5’ and ‘2’ ‘7’ AND ‘4’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select GS1 DataBar™ Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character