Datalogic DRAGON M SERIES, Quick Reference

Page: 14 / 82

DATALOGIC
8
UK/US
8.
Firmly insert the gun into the OM-DRAGON™ within 10 seconds; a beep
will be emitted, signaling that the OM-DRAGON™ has been paired to the
DRAGON™ M, and the green LED on the reader will go off.
YOUR READER IS NOW CONFIGURED TO READ BARCODES USING THE
DEFAULT VALUES.
9.
Configure the OM-DRAGON™ base, refer to the “OM-DRAGON™
Quick Reference”.
USING MULTIPLE GUNS WITH SAME CRADLE
If you want to use several DRAGON™ M guns with the same OM-DRAGON™
cradle, you must first
Bind the cradle with one of the guns (see the previous
"DRAGON™ M/OM-DRAGON™ Stand Alone Setup" procedure).
Successive guns can be associated with this same cradle by following the
configuration procedure substituting the
Bind command with Join (step 7).
Join
7.
i3//k
i3//k
i3//k
The green LED on the DRAGON™ M will blink: the gun is ready to be
inserted into the cradle.
Complete step 8.
END of procedure.
WARNING
If the cradle is not bound to a gun, its address assumes a
random value which can cause conflicts and malfunctions
to other cradles within its range.