Datalogic DLR-DK001 Series, User Quick Reference Manual

Page: 10 / 24

General Features
2 DLR-DK001-xx
General Features
The DLR-DK001-XX is mainly dedicated to fixed Desktop
setups, but a fixed wall-mount point-of-access is possible
as well. The Desktop configuration allows it to interact
directly with legacy application, office automation SW and
many other generic service and maintenance applications.
The integrated circular antenna makes the radiation
pattern a good compromise in terms of directivity. This
means practically no orientation problems will be
experienced for a population of UHF Tags being located in
its proximity.
Special attention has been given to minimizing the mean
current consumption by limiting the active read time.
The USB 2.0 is seen as a serial Virtual Com Port (VCP). All
machines with Windows OS versions, Linux vers. 2.40 and
greater, having proper VCP drivers could be interfaced. The
port is used for powering, too, so it must be connected to
500 mA rated USB Ports.
Using the DLR-DK001-XX
The DLR-DK001-XX normal behavior is to capture all the
sensed identification codes associated to the reachable
UHF Tags. The reader’s Top Panel is the User Interface. All
the commands are issued from the host’s application.
Figure 1. DLR-DK001-XX Top Panel