Datalogic DLL5000 Series, Quick Reference, Page: 10 / 16

WEDGE (continued)
IBM Terminals 31xx, 32xx, 34xx, 37xx:
UK
To select the interface for these IBM Terminals, read
the correct KEY TRANSMISSION code. Select the
KEYBOARD TYPE if necessary (default = advanced
keyboard).
I
Per selezionare l'interfaccia per i terminali IBM, leg-
gere il codice Key Transmission e, se necessario, il
codice Keyboard Type (default = advanced
keyboard).
F
Pour selectionner l'interface pour des terminaux
IBM, lire le code de transmission du clavier (Key
Transmission Code) et, si nécessaire, aussi le code
correspondant à votre clavier (Keyboard Type Code)
(défaut = advanced keyboard).
D
Um die Schnittstelle für IBM Terminals einzustellen,
lesen Sie den entsprechenden Key Transmission
Code und falls nötig den Keyboard Type Code
(Werkseinstellung = advanced keyboard).
KEY TRANSMISSION
make-only keyboard
i$1Pk
i$1Pk
i$1Pk
make-break keyboard
i$1Ik
i$1Ik
i$1Ik
KEYBOARD TYPE
advanced keyboard
i',fk
i',fk
i',fk
typewriter keyboard
i',ak
i',ak
i',ak
1 DEFAULT
UK Read the RESTORE DEFAULT.
I Leggere il codice che ripristina i default.
F
Lecture du code de configuration par défaut.
D
Lesen Sie den Restore Default Code, um die
Werkseinstellung wieder herzustellen.
RESTORE DEFAULT
iPk
iPk
iPk
RS232 DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking,
ack/nack disabled, fifo enabled, delay disabled, rx timeout 5
sec., serial trigger lock disabled;
DATA FORMAT
: code identifier disabled, no header,
terminator = CR-LF
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, delays disabled, control
character emulation = ctrl+shift+key;
DATA FORMAT
: code identifier disabled, no header,
terminator = ENTER
PEN EMULATION DEFAULT SETTINGS
interpret mode, conversion to code 39 disabled, output
level normal, idle level normal, minimum output pulse
600
µ
s, overflow medium
POWER SAVE
laser driver = off before beep
READING PARAMETERS
trigger type = hardware, trigger signal = level, no timeout,
Flash On = 1 sec, Flash Off = .6 sec, one read per cycle,
safety time .5 sec, beeper intensity high, tone 2