Datalogic DL8700, Installation And Operator'S Manual, Page: 16 / 49

DL8700
10
2
2 INSTALLATION
2.1 INSTALLING MOUNTING BRACKETS AND DL8700
CAUTION
This device is intended to transmit RF energy. For protection against RF
exposure to humans and in accordance with FCC rules and Industry
Canada rules, this transmitter should be installed such that a minimum
separation distance of at least 20cm (7.8 in.) is maintained between the
antenna and the general population.
Equipment Needed: Phillips No. 1 screwdriver and a Torque wrench capable of measuring to
50 inch pounds (5.64±.56 N/m).
NOTE
Torquing tool, bolts, washers, and wrench needed when attaching the
bottom mounting bracket to the vehicle are not supplied by Datalogic.
Before installation begins, verify you have the following vehicle mounting bracket assembly
components:
•
Back Mounting Bracket Assembly
This bracket is attached to the DL8700. It is pre-assembled at LXE.
6 each 8-32 x 7/16 Pan Head Screw (connects to the back of the computer)
6 each 8-32 x 3/8 Flat Screw (connects to the side of the computer)