Datalogic CATCHER D531 Series, Quick Reference

Page: 26 / 28

DATALOGIC
SCANNER DATA ENTRY
H = high tone L = low tone
Beeper LED Meaning
one beep
2
Green constant Correct read of a code in normal mode.
It remains constant once the decoding
process has been successfully
completed and the scanner is in
Timeout between same code readings .
Red constant It is constant in normal mode while the
Laser is ON and the scanner is ready to
read a new code (not in
Timeout
between same code readings ).
LH
1
Red constant No read in single line mode after Single
Line Decoding Duration timeout.
Red blinking fast It blinks fast when the scanner is in
Stand-by mode.
Red blinking slow
It blinks slower when the scanner is in
Sleep mode.
Green/Red blinking
alternatively
They turn on alternatively during serial
configuration.
1
only the Beeper Intensity command can modify these signals.
2
the data entry good read tone is user-configurable with all the Beeper
commands in the Reading Parameter section.
WARRANTY
Datalogic warranties this product against defects in workmanship and materials,
for a period of 24 months from the date of shipment, provided that the product is
operated under normal and proper conditions.
Datalogic has the faculty to repair or replace the product, these provisions do
not prolong the original warranty term.
The warranty does not apply to any product that has been subject to misuse,
accidental damage, unauthorized repair or tampering.
20