Datalogic C-BOX 100, Installation Manual, Page: 15 / 25

INSTALLATION
5
2
C-BOX 100 can be installed to operate in different positions. The two screw holes
inside the housing of the C-BOX 100 are for mechanical fixture (Figure 4).
To mount the C-BOX 100:
1) Open the C-BOX 100 by unscrewing the 4 cover screws. If necessary, using the
two mounting holes inside the device as a pattern, mark the panel with an
appropriate object and then drill two holes in the panel.
2) Align the C-BOX 100 and insert two screws and screw them into the panel until
tight (see Figure 4).
Figure 4 - Mounting C-BOX 100